← back to blog

Stablecoin Depegs While Your Funds Are Parked In A Farm

The part of the farm nobody watches

When farmers talk about risk, they usually mean the volatile parts. The token they’re farming might never launch. The chain might lose attention. The points might convert at a disappointing rate. What rarely comes up is the stablecoin sitting underneath all of it, because the whole point of a stablecoin is that you don’t have to think about it.

That’s the problem. A large share of farming capital sits in stablecoins: deposited into points vaults, supplied to lending markets, paired in stable-to-stable liquidity pools, looped for boosted rewards, or bridged to a new chain to qualify for its campaign. Farmers choose stablecoins precisely so that the capital itself isn’t at risk while they chase the rewards on top. For most of the time, that works.

But a stablecoin’s peg is a promise, and different stablecoins make that promise in different ways. Some are backed by cash and short-term government debt held by a company. Some are backed by crypto locked in contracts. Some rely on market mechanisms and incentives. Some are synthetic, built out of derivatives positions. Each design has its own way of breaking, and when one breaks, the farm built on top of it can lose far more than the rewards it was chasing.

This piece doesn’t predict which stablecoins will hold or fail. Nobody can do that reliably, and anyone claiming to is guessing. What it does is explain how the main designs can lose their peg, what that does to the positions farmers typically hold, and how to keep your exposure visible so a depeg finds your capital spread out rather than in one place.

It’s written as risk awareness. It isn’t investment advice, and it won’t tell you what to buy or sell.

What a peg actually is

A stablecoin is a token designed to trade at a fixed value, usually one US dollar. The peg is the mechanism that keeps the market price close to that value. When it works, you can treat one unit as one dollar. When it doesn’t, the token trades below or, occasionally, above that value, and the gap is the depeg.

Pegs are held by some combination of two things: a redemption path and market incentives.

A redemption path means someone can hand the token back to the issuer or the protocol and get one dollar’s worth of something in return. If the token trades at 0.98, anyone with redemption access can buy it at 0.98 and redeem it for 1.00, pocketing the difference. That buying pushes the price back up. The strength of this depends on who can redeem, how fast, and whether the issuer can actually pay.

Market incentives mean the design encourages people to buy when the price is low and sell when it’s high, through interest rates, liquidation rules or minting and burning mechanics. These can work well in normal conditions and fail when conditions are extreme.

The important detail is who has redemption access. For many large fiat-backed stablecoins, direct redemption is limited to verified institutions or accounts that have gone through the issuer’s onboarding. Ordinary users trade on the secondary market. That means the peg in the market you actually use depends on those institutions choosing to arbitrage, which they usually do, but not always instantly.

Fiat-backed designs and how they break

Fiat-backed stablecoins are issued by a company that holds reserves, usually cash, bank deposits and short-term government debt, and promises to redeem each token for a dollar. They’re the most widely used type, and for most of their history they’ve held close to their peg.

Their risks sit off-chain. The first is reserve risk: whether the reserves actually exist, are what they’re claimed to be and are available when needed. Issuers publish attestations or reports to address this, with varying detail and frequency.

The second is custody and banking risk. Reserves held at banks are exposed to those banks. In March 2023, a major fiat-backed stablecoin briefly traded well below its peg after a US bank holding part of its reserves failed over a weekend. The peg recovered after the reserves were confirmed to be safe. For a few days, though, the market priced in the possibility that they weren’t, and anyone who sold or was liquidated during that window locked in the loss.

The third is issuer control. Fiat-backed issuers can usually freeze addresses and, in some cases, block transfers. That’s used for compliance and stolen-fund recovery, and it’s a power over your tokens that exists whether or not it’s ever used on you.

The fourth is redemption friction. If redemptions are slow, gated or limited to institutions, secondary-market prices can drift during stress even when reserves are fine.

The pattern to remember: fiat-backed depegs are usually about confidence in something off-chain. They can be sharp and short, and they’re often triggered by news, not by on-chain events you could watch.

Crypto-backed designs and how they break

Crypto-backed stablecoins are minted against crypto collateral locked in smart contracts, usually with more collateral than the value of stablecoins issued. If someone locks 150 dollars of ETH to mint 100 dollars of stablecoin, that extra buffer protects the peg if ETH falls.

When collateral prices fall far enough, positions are liquidated: the collateral is sold to repay the stablecoin debt. As long as liquidations work, the system stays backed.

The main risk is a fast crash. If collateral prices fall very quickly, liquidations can struggle. Blocks fill up, gas spikes, liquidation auctions may clear at bad prices, and in extreme cases the system can end up with debt that isn’t fully covered. That’s when the peg comes under pressure.

The second risk is oracle failure. The system relies on price feeds to decide when to liquidate. If a feed lags, is manipulated or stops updating, liquidations can happen too late or not at all.

The third is collateral composition. Some crypto-backed designs have added other stablecoins or tokenised real-world assets as collateral. That can improve stability in normal times, but it imports the risks of those assets. A crypto-backed stablecoin partly backed by a fiat-backed one inherits some of the fiat-backed one’s off-chain risk.

The fourth is governance and parameters. Collateral ratios, accepted assets and interest rates are set by governance. Changes can shift the risk profile of what you’re holding, sometimes gradually and sometimes all at once.

Crypto-backed depegs tend to be tied to on-chain market stress, which means they often coincide with the moments when everything else in your farm is also under pressure.

Algorithmic designs and how they break

Algorithmic or undercollateralised stablecoins try to hold their peg mainly through incentives and minting mechanics rather than full backing. A common pattern pairs the stablecoin with a second, volatile token. When the stablecoin trades below the peg, users can burn it to mint a dollar’s worth of the volatile token, removing stablecoin supply. When it trades above, the reverse.

This works while people value the volatile token. The weakness is reflexivity. If confidence drops, the stablecoin falls below peg, people burn it for the volatile token and sell that token, its price falls, each burn mints more of it, and the cycle feeds itself. In May 2022, a large algorithmic stablecoin and its paired token collapsed in exactly this way over a matter of days, and the stablecoin never recovered its peg.

That episode is the reason many people treat any design without full, liquid backing with suspicion. It’s also why high yields on algorithmic stablecoins deserve a hard question: what is actually paying that yield, and what happens to it if demand falls?

Not every design with an algorithmic component is the same. Some combine partial collateral with algorithmic mechanisms, and the risk depends on the details. But the basic pattern holds. The less the peg depends on assets that can actually be redeemed, the more it depends on continued confidence, and confidence is the thing that fails fastest.

Synthetic dollars and how they break

A newer category is the synthetic dollar, which holds a stable value by combining assets and derivatives. A common approach holds a volatile asset, such as ETH or staked ETH, and opens a short position of the same size on a derivatives exchange. If ETH rises, the asset gains and the short loses. If ETH falls, the reverse. The combination aims to stay worth roughly the same in dollar terms.

These designs often pay yield, sourced from staking rewards and from funding payments that short positions receive when markets are bullish. That yield is part of why they’re popular in points campaigns.

They carry risks that fiat-backed and crypto-backed designs don’t. Funding risk is the first: funding rates can turn negative, meaning shorts pay longs. If that lasts, the yield disappears and the backing can erode. Designs usually hold a reserve fund to absorb this, and its size relative to supply matters.

Exchange counterparty risk is the second. The short positions sit on centralised or decentralised derivatives venues. If a venue fails, freezes withdrawals or is hacked, the backing held there may be lost or stuck.

Custody risk is related: the collateral backing those positions is often held with custodians or in off-exchange settlement setups, each with its own trust assumptions.

Liquidity and exit risk is the fourth. Many synthetic dollars have a staked or yield-bearing version with a cooldown period to unstake. During stress, you may not be able to exit quickly, and the secondary market may trade at a discount.

Synthetic designs are newer and less tested through a full market cycle. That doesn’t mean they’ll fail. It means their failure modes are less well understood by the people holding them.

Bridged versions and wrapped stablecoins

A stablecoin on one chain isn’t always the same asset as a stablecoin with the same ticker on another. This matters a lot for farmers, who move capital across chains constantly.

Some issuers deploy their stablecoin natively on many chains. The token on each chain is issued by the same company and backed by the same reserves.

Others exist on a new chain only as a bridged version. Someone locks the original on its home chain, and a bridge mints a representation on the new chain. That representation is only as good as the bridge. If the bridge is exploited, the bridged tokens may no longer be backed, even though the original stablecoin is perfectly fine.

It’s common for a chain to have both a native and a bridged version of the same stablecoin at once, with similar names and tickers. Wallets and pools may label them differently, or not clearly at all.

For a farmer, the question is simple: which version am I holding? The contract address tells you. The issuer’s own documentation usually lists native deployments. If your “stablecoin” on a new chain came through a bridge, you’re carrying bridge risk on top of the stablecoin’s own risk.

Wrapped and yield-bearing versions work similarly. A vault receipt that represents deposited stablecoins is a claim on the vault, not the stablecoin itself. Its value depends on the vault’s contracts and strategy too.

Why stable-pair pools aren’t risk-free

Stable-to-stable liquidity pools are popular in farming because they seem to avoid the main risk of providing liquidity. If both assets are worth a dollar, the price between them shouldn’t move, so there’s little divergence loss. The fees and rewards look like nearly free yield.

That’s true while both assets hold their pegs. When one depegs, the pool works against you.

Here’s the mechanism. A stable pool is designed to let traders swap between the two assets at close to one-to-one. If one asset starts trading below a dollar elsewhere, traders buy it cheaply on the open market and swap it into the pool for the healthy asset at close to par. They keep doing this until the pool’s price reflects the depeg. The result is that the pool fills up with the depegged asset and drains of the healthy one.

As a liquidity provider, you own a share of that pool. So your position shifts from roughly half and half into mostly the asset that’s losing value. If you withdraw during or after the depeg, you receive that mix. The pool did exactly what it was built to do. It just did it at your expense.

Pools with more than two stablecoins spread this out, but the effect is the same: the weakest asset in the pool accumulates.

Stable-pair liquidity is still a reasonable thing to provide. It’s also a position that ends up holding the worst of its assets when things go wrong, which makes it a poor idea of a riskless parking spot. Knowing which assets are in your pools, and watching the pool’s composition, tells you early if one of them is under pressure.

Lending markets and loops

Farmers often supply stablecoins to lending markets, or use them as collateral to borrow, sometimes looping the same capital several times to boost points. Depegs interact with these in ways that can surprise people.

If you supply a stablecoin that depegs, the market still owes you that stablecoin, which is now worth less. Your supplied position loses value along with the asset.

If you borrow a stablecoin against other collateral and the stablecoin depegs downward, your debt becomes cheaper to repay in dollar terms. That sounds good, and briefly it can be, but it often happens during wider stress when your collateral is also falling.

If you use a stablecoin as collateral and it depegs, your collateral value falls, which can trigger liquidation. Whether it does depends on how the market prices that stablecoin. Some markets use a live market price. Others hard-code or cap the price at one dollar for certain stablecoins, which avoids liquidations during short wobbles but can leave the market holding bad debt if a depeg is real. Neither approach is free of risk. It’s worth knowing which one your market uses.

Loops magnify everything. A position that supplies a stablecoin, borrows against it, and resupplies several times has several times the exposure to that stablecoin’s peg and several times the liquidation risk if the peg moves.

Yield-bearing stablecoins in loops add another layer. If the yield-bearing version trades at a discount during stress, loops built on it can unwind badly.

How one depeg spreads to others

Stablecoins are wired together through pools, collateral and reserves, and a depeg in one can put pressure on others that have nothing wrong with them directly.

Shared pools are the most visible link. If a large stable pool holds several stablecoins and one of them depegs, the pool fills with that asset, as described above. Anyone who needs to exit the healthy stablecoins in that pool now faces worse prices, and the pool’s own receipt token may trade at a discount. Protocols that accept that receipt as collateral then have their own problem.

Collateral links are less visible. Some stablecoins are partly backed by other stablecoins. If a crypto-backed design holds a large share of a fiat-backed stablecoin as collateral and that fiat-backed stablecoin wobbles, the crypto-backed one can wobble too, even though its own contracts worked perfectly. During the March 2023 episode mentioned above, stablecoins with exposure to the affected one came under pressure alongside it.

Behavioural links matter too. When one stablecoin depegs, holders of similar designs get nervous and some exit, which can push those stablecoins below peg briefly even if nothing is wrong. A fiat-backed depeg makes people look harder at every fiat-backed issuer. An algorithmic collapse makes people look harder at every design without full backing.

Lending markets connect everything. A stablecoin used as collateral across several markets can trigger liquidations in all of them, and liquidators selling that collateral add to the selling pressure.

The practical takeaway is that diversification across stablecoins helps less than it seems if those stablecoins are all linked. Two stablecoins in the same pool, or one backing the other, behave more like one exposure than two.

Why the yield is higher on the riskier designs

Points campaigns and farming incentives often pay the most on stablecoins that carry the most risk. That follows directly from how new issuers grow, and it’s worth understanding.

A new stablecoin issuer needs users and liquidity. The fastest way to get them is to pay: high yields, boosted points, multipliers for providing liquidity or looping. Those incentives compensate early users for taking on the risk of an unproven design, a thin secondary market and an issuer without a long track record.

The incentives are a price, and an honest one. The extra yield or points are what the market is paying you to hold something the market considers riskier than the established options. If a new stablecoin paid the same as the most established ones, there’d be little reason to move capital into it.

For farmers, this means asking two questions: “how many points will this earn?” and “what am I being paid to hold, and how does it fail?” A points program that rewards holding a synthetic dollar is paying you to take funding and exchange risk. One that rewards providing liquidity to a new stable pool is paying you to be the one who absorbs the depegged side if something goes wrong.

It also means yields and points tend to fall as a design matures and becomes trusted. That’s the market repricing the risk, and it’s normal.

None of this predicts that any particular design will fail. It’s a way of reading the incentive: high rewards on stablecoins are usually telling you something about risk, and it’s better to hear that clearly than to treat the yield as free.

Weekends, news and the timing of depegs

Depegs don’t wait for convenient moments. Several features of the market make them more likely to hurt at awkward times.

Fiat-backed stablecoins depend on banks and traditional markets for reserves and redemptions. Those systems operate on business days. If bad news about an issuer’s bank breaks on a Friday evening, redemptions may not be processed until Monday. For the whole weekend, the secondary market has to price the uncertainty without the arbitrage that usually holds the peg.

Crypto markets never close, so collateral crashes can happen at any hour. A fall in the small hours of your local time might trigger liquidations and peg pressure before you wake up.

News spreads faster than confirmation. Rumours about reserves or custody can move prices in minutes, while issuers may take hours to respond.

For farmers, the lesson is not to rely on being able to react in time. Positions should be sized and structured so that a depeg while you’re asleep, travelling or offline for a weekend doesn’t force a disaster. That means avoiding leverage you can’t monitor, keeping liquidation buffers generous and not having everything locked in positions that depend on one design.

Cooldowns, queues and the exit problem

A depeg is a price problem. How much it costs you often depends on whether you can exit, and many farming positions have exits that aren’t instant.

Staked or yield-bearing versions of some stablecoins have cooldown periods to unstake, sometimes days. Points vaults may have withdrawal queues or lock periods to qualify for multipliers. Some protocols can pause withdrawals in an emergency. Bridges may be slow or congested at exactly the moment everyone wants to leave.

During a depeg, those delays matter. If you can’t exit a position for a week, you’re exposed to whatever happens that week, and selling your claim on the secondary market may mean accepting a steep discount.

This doesn’t mean you should avoid every position with a cooldown. Many are reasonable trades for the rewards offered. It means you should know which of your positions are locked and for how long, and size them accordingly. Money you might need quickly shouldn’t be in something you can’t get out of quickly.

It also means thinking about correlation. If most of your locked positions depend on the same stablecoin, a depeg hits all of them at once, and none of them can be exited to free up capital for the others.

A worked example

Here’s a made-up farm to show how exposure can hide.

An operator has capital split across four positions, all “in stablecoins”. One is a points vault holding a synthetic dollar, with a seven-day cooldown. Another is a stable pool on a new chain pairing a bridged fiat-backed stablecoin with a native one. The third is a lending market where they supply the same synthetic dollar’s yield-bearing version as collateral and borrow a fiat-backed stablecoin, looped twice. The fourth is plain fiat-backed stablecoins in a hardware wallet.

On paper, that’s diversified. In practice, three of the four positions depend on the synthetic dollar or the bridge. If funding rates turn negative for a long period and the synthetic dollar trades at a discount, the points vault loses value and can’t exit for a week. The lending loop’s collateral falls, possibly towards liquidation, depending on how the market prices it. If the bridge on the new chain has a problem instead, the stable pool fills with the bridged token.

The only position with a simple, independent risk profile is the one in the hardware wallet.

None of this says the operator made a bad decision. It says the exposure was concentrated in ways the word “stablecoin” hid. Writing down each position’s underlying design, bridge and exit terms would have made that visible in a few minutes.

Keeping your exposure visible

The practical defence against depegs is knowing what you hold. Prediction doesn’t come into it.

For each stablecoin position, note four things. Which stablecoin, by contract address, not ticker. Which design it uses: fiat-backed, crypto-backed, algorithmic, synthetic or some hybrid. Whether it’s native or bridged on the chain you’re using. And how quickly you can exit the position.

Then look at the totals. How much of your farm depends on each design? On each issuer? On each bridge? If one of those failed, what share of your capital would be affected?

Spread across designs rather than just across tickers. Holding three stablecoins that all depend on the same kind of mechanism, or the same bridge, isn’t much of a spread. Mixing designs means one failure mode doesn’t hit everything at once, though it also means you carry several different risks instead of one.

Check pool compositions occasionally. A stable pool that’s drifted heavily towards one asset may be telling you the market is less confident in it.

Keep some capital outside the farm, in the simplest form you trust, with no cooldown and no protocol risk on top. That’s the capital that lets you act if something goes wrong elsewhere.

What to do when a peg wobbles

Pegs move slightly all the time. Small deviations, a fraction of a percent, are normal and usually reverse on their own. A larger or persistent deviation is worth paying attention to.

First, find out why. Is there news about the issuer, its reserves or its banks? Is collateral crashing? Are funding rates negative? Has a bridge had an incident? The reason matters, because different causes recover differently, or don’t.

Check official sources. Issuers usually communicate during significant events, and their statements, along with reserve attestations, give you something firmer than social media speculation.

Look at your exposure list. Which positions depend on this asset? Which can you exit, and how fast? Which are locked?

Think before acting. Selling a depegged stablecoin locks in the loss at whatever price you get. If the peg recovers, that loss was avoidable. If it doesn’t, holding cost you more. Nobody knows which in advance, and this piece won’t pretend otherwise. What you can do is avoid forced decisions, like a liquidation you didn’t anticipate, by knowing your positions ahead of time.

And watch for the same scams that follow any incident: fake “redemption portals” and fake support accounts, plus the compensation tokens that land in wallets uninvited. The official redemption path, if there is one, is on the issuer’s own site.

Where this analysis stops

I want to be explicit about the limits. This piece explains mechanisms. It doesn’t rate any stablecoin, predict any depeg or tell you which to hold. Each design has worked for long periods and each has, at some point in the industry’s history, failed or come close.

It also doesn’t cover every design. Stablecoins keep evolving, and hybrids combine elements in ways that don’t fit neatly into categories. For any specific stablecoin, the issuer’s documentation and reserve reports are the place to start.

I haven’t modelled the probability of depegs for particular stablecoins, and I’d be wary of anyone who claims to have done so with confidence. What the mechanics show is that “stable” describes a goal, not a guarantee, and a farm that knows which promise each dollar in it depends on is much harder to surprise.

For more on protocol risk, stable liquidity and keeping a farm’s capital exposure visible, head back to the Airdrop Farming homepage.

Get new guides and videos first — join the Telegram channel.

need infra for this today?