Setup guide: OKX Wallet multi-profile setup for cross-chain farming
Setup guide: OKX Wallet multi-profile setup for cross-chain farming
Running a single wallet on a single browser profile is fine for casual use. it is not fine for farming. the moment you start hitting protocols across EVM chains, Solana, and appchains simultaneously, you need wallet isolation, clean fingerprints per address, and a system that does not leak connections between identities. one slip, and you have linked 40 wallets to a single fingerprint. that usually means a single allocation, or nothing.
OKX Wallet has become one of the better options for multi-chain farming specifically because of its extension architecture, its built-in cross-chain support, and the fact that it handles EVM, Solana, Bitcoin, Cosmos, and Starknet under one interface without requiring you to juggle five separate extensions per profile. i started using it seriously in mid-2024 and it has replaced a Metamask-plus-Phantom combo I was running for about 18 months.
this guide is for operators who already understand what airdrop farming is and are ready to set up 10 to 50 profiles with properly isolated OKX Wallet instances. you will end up with an antidetect browser running separate profiles, each with its own OKX Wallet extension, its own seed phrase, and its own proxy. by the end you should be able to spin up new profiles in under five minutes and farm across EVM, Solana, and any chain OKX supports from a single machine.
what you need
software - antidetect browser: AdsPower or Multilogin are the two serious options. AdsPower starts at $9/month for 10 profiles. Multilogin starts at €29/month. i run AdsPower for most of my operations. - OKX Wallet browser extension (available on the Chrome Web Store) - a seed phrase manager, either a local encrypted vault (Bitwarden self-hosted) or a spreadsheet on an air-gapped machine. not a cloud note app.
infrastructure - residential or mobile proxies, one per profile. datacenter proxies will get flagged on most protocols. expect $3-8/GB for residential. - a funded hot wallet for gas distribution. keep this separate from your farming wallets.
accounts and costs - OKX account (optional but useful if you also CEX-farm): okx.com - budget for gas: minimum $5-10 per wallet for initial cross-chain activity - time: first 10 profiles take about 3-4 hours. after that you can template it.
skills expected - you understand seed phrases and know not to store them in plaintext on an internet-connected device - you can configure a browser extension manually - you have basic familiarity with EVM transactions and Solana
step by step
step 1: install and configure AdsPower
download AdsPower from adspower.com and create an account. on the free plan you get 2 profiles. for 10+ profiles you need the paid tier.
in AdsPower, go to Profile > New Profile. set the browser fingerprint to mimic a mid-range consumer device (Windows 10, Chrome 124+, screen resolution 1920x1080). do not use extreme or rare fingerprint values. the goal is to look like a normal retail user, not to be unique.
assign a proxy to the profile before saving. use a residential proxy tied to the region you want the profile to represent. format in AdsPower is http://user:pass@host:port.
expected output: profile appears in your profile list, proxy check shows green.
if it breaks: if the proxy test fails, check whether your proxy provider requires allowlisted IPs or uses a different auth format. some providers use socks5:// instead of http://.
step 2: open the profile and install OKX Wallet
launch the profile from AdsPower. it opens an isolated Chromium instance. inside that browser, navigate to the Chrome Web Store and install OKX Wallet. the extension ID is mcohilncbfahbmgdjkbpemcciiolgcge, you can verify this matches the official OKX Wallet listing before installing.
pin the extension to the toolbar.
expected output: OKX Wallet icon appears in the Chrome toolbar of this profile only. other profiles do not have it yet.
if it breaks: if the extension installs but does not appear, check that AdsPower is not blocking extensions at the profile settings level. some configurations have an extension whitelist.
step 3: generate and record a new seed phrase
click the OKX Wallet icon and select Create Wallet. OKX will generate a 12-word or 24-word seed phrase. write it down on paper or paste it into your encrypted vault immediately. do not screenshot it.
set a strong profile-specific password (not shared across profiles).
label the wallet. i use a naming convention like farm-01-eth, farm-02-arb, etc., so i know which profile corresponds to which address without opening the wallet.
expected output: wallet created, showing an EVM address and Solana address by default.
if it breaks: if OKX Wallet shows a blank screen after install, try disabling hardware acceleration in the AdsPower profile settings and relaunch.
step 4: enable the chains you need
inside OKX Wallet, go to Manage Chains (the grid icon on the wallet home screen). enable the chains relevant to your farming targets. common ones: Ethereum mainnet, Arbitrum One, Optimism, Base, zkSync Era, Scroll, Linea, Solana, and Starknet.
for any EVM chain not listed by default, you can add it manually using the chain’s RPC details. most chains publish their official RPC endpoints in their documentation. for example, Arbitrum’s official RPC is documented at docs.arbitrum.io.
expected output: chain list shows all your target networks. wallet shows $0 balance across all of them (expected, wallet is unfunded).
if it breaks: if a custom RPC fails to connect, double-check the chain ID. mismatched chain IDs are the most common cause of RPC errors.
step 5: record the wallet addresses
for each enabled chain, copy the public address and log it in your tracking sheet. for EVM chains it will be the same address. Solana will be a separate address. Starknet may differ depending on account deployment.
your tracking sheet should have: profile ID, EVM address, Solana address, proxy assigned, date created, chains funded.
this is the operational record you will use to track activity and distributions. i keep mine in a local SQLite file and query it with a simple Python script when i need to cross-reference.
expected output: full address log for the profile.
if it breaks: nothing breaks here, this is manual record-keeping. if you skip it you will regret it when you have 40 profiles and cannot remember which address is on which profile.
step 6: fund the wallet
from your gas distribution wallet, send a small amount of ETH (or the relevant native token) to the new EVM address, and SOL to the Solana address. keep initial funding small, $5-15 depending on the chain’s gas costs.
if you are funding many wallets at once, a simple script helps:
# example: batch send ETH using web3.py
from web3 import Web3
w3 = Web3(Web3.HTTPProvider("https://mainnet.infura.io/v3/YOUR_KEY"))
addresses = [
"0xABC...",
"0xDEF...",
# add your list
]
sender = w3.eth.account.from_key("YOUR_PRIVATE_KEY")
for addr in addresses:
tx = {
"to": addr,
"value": w3.to_wei(0.005, "ether"),
"gas": 21000,
"gasPrice": w3.eth.gas_price,
"nonce": w3.eth.get_transaction_count(sender.address),
"chainId": 1,
}
signed = w3.eth.account.sign_transaction(tx, sender.key)
w3.eth.send_raw_transaction(signed.rawTransaction)
expected output: wallet shows balance. OKX Wallet refreshes automatically within a few seconds.
if it breaks: if balance does not appear, check that the correct chain is selected in OKX Wallet. sending ETH on Arbitrum will not show on Ethereum mainnet view.
step 7: connect to a protocol and test the setup
inside the same AdsPower profile, navigate to a protocol you are targeting. connect OKX Wallet when prompted. approve a small transaction (a swap, a bridge, a mint) to confirm the full loop works: profile > proxy > wallet > protocol.
check that the transaction appears in the wallet’s history and on-chain.
expected output: transaction confirmed. wallet history updates.
if it breaks: if the protocol does not detect OKX Wallet, check that the extension is active in this profile and that you have not accidentally blocked pop-ups (which would block the wallet’s approval window).
step 8: template and replicate
once profile 1 works end-to-end, duplicate the AdsPower profile configuration, swap in a new proxy, and repeat steps 3-7. most of the time the extension does not need reinstalling, since AdsPower can clone the browser environment. verify the new instance has a fresh OKX Wallet (not sharing state with profile 1) before generating a new seed phrase.
AdsPower supports bulk profile creation via its API if you are setting up more than 20 profiles. the documentation for that is in their developer portal.
expected output: second profile is operational, fully isolated from profile 1.
if it breaks: if the cloned profile still shows profile 1’s wallet, you need to clear the extension storage before generating a new seed. in AdsPower, you can reset extension data per profile without reinstalling.
common pitfalls
reusing seed phrases across profiles. this is the most common mistake and it collapses your isolation entirely. every wallet must have a unique seed generated inside its own profile session. do not import the same seed into multiple OKX Wallet instances.
forgetting to assign a proxy before first connection. some operators create the profile, launch it, connect to a protocol, and then add the proxy. by that point the real IP has already touched the protocol. assign the proxy before the profile ever touches external traffic.
using the same gas distribution address too visibly. if 40 wallets all receive ETH from the same address in the same hour, on-chain analytics tools can cluster them. space out funding transactions or use an intermediate hop. this is an operational security issue, not a technical one. for a deeper look at fingerprinting risk across profiles, the antidetectreview.org blog covers browser-level and on-chain correlation in detail.
ignoring Solana. OKX Wallet handles Solana natively. most operators set up the EVM side correctly and never fund or activate the Solana address. if a protocol does a Solana phase, that wallet is useless. activate Solana during setup, not retroactively.
no record-keeping. at 10 wallets you can remember which is which. at 40 you cannot. the tracking sheet from step 5 is not optional.
scaling this
10 profiles: everything above applies directly. you can manage 10 profiles manually, one by one. setup time is a few hours. this is the baseline.
100 profiles: manual setup becomes a bottleneck. at this scale you want AdsPower’s API or RPA automation (they have a built-in browser automation tool) to handle profile creation and extension initialization. your seed phrase management needs to be systematic, either a script that generates and stores seeds, or a hardware wallet flow for high-value addresses. proxy costs become significant, budget $50-150/month for residential proxies at this scale.
1000 profiles: this is a different operation entirely. you are likely running multiple machines or a VPS setup, not a single desktop. browser-based antidetect becomes expensive and slow at this scale. some operators shift to headless browser automation with custom fingerprinting, though that is significantly more complex to maintain. on-chain activity management also requires tooling: you need scripts tracking nonce, gas prices, and activity per wallet, not manual checks. the multiaccountops.com blog covers operational patterns at this scale, including wallet clustering detection and batch transaction management.
gas distribution at 1000 wallets requires either a smart contract-based dispenser or a well-structured batching script. the naive approach of sending one transaction per wallet is too slow and too expensive.
where to go next
once your profiles are running, the next questions are usually about what to do with them and how to track performance.
- how to use AdsPower for airdrop farming: profiles, proxies, and RPA setup covers the antidetect browser side in more depth, including RPA scripting for repeatable on-chain actions
- OKX Wallet vs Metamask for airdrop farming: a practical comparison is worth reading if you are deciding whether to standardize on OKX or keep a mixed-wallet setup
- /blog/ has the full index of tutorials if you are looking for chain-specific farming guides
Written by Xavier Fok
disclosure: this article may contain affiliate links. if you buy through them we may earn a commission at no extra cost to you. verdicts are independent of payouts. last reviewed by Xavier Fok on 2026-05-22.